CarPro Cquartz Lite is formulated with a combination of Sio2 and Tio2 particles with over 45% solid materials. This unique makeup allows for easier to clean surfaces, resistance to insect splatter, petrol spills, light solvents, and UV rays while providing a beading contact angle of 110 Degrees. CarPro created this coating based on the formula of the popular CarPro Cquartz UK version for customers who want a super-strong layer of protection that looks amazing.
CarPro Lite is easy to apply. It can be sprayed or wiped on and then wiped off. It can be applied to paint, plastic, wheels, and windows (not your windshield). Lite will keep your car clean, glossy, and very hydrophobic!
The CarPro CQuartz Lite Kit includes a 150ml bottle of Lite. Each application will require 15ml - 50ml depending on the application method you choose and how much of your automobile you are applying it to. CarPro Lite is a great stand-alone layer of protection or perfect for topping an existing coating. CarPro Lite will last 6-12 months.
CQuartz Lite Kit Includes:
1x CQuartz Lite 150ml Bottle
2x Microfiber Applicator
1x CarPro 2Face No Lint Towel
1x 3M Face Mask
1x User Manual
Durability: 6-12 Months
Average Thickness: 1 Micron
Coverage 15ml-50ml per coat depending on the method of application
Water contact angle: 110 Degrees
Recommended working temperatures: 40F to 100F
CarPro Application Instructions:
Make sure the surface is clean and fully decontaminated. Use CarPro Iron X, Tar X, and clay the surface to ensure all contamination is removed.
Use Carpro Eraser (or similar) to remove oils before application. Make sure the surface is cool and dry. You may wish to polish the surface with CarPro Essence to create higher gloss before using Eraser or to ensure maximum durability.
Apply 10-12 drops on a microfiber applicator; apply the product evenly to one small area of roughly 24x24" / 60cm x 60cm with complete coverage and an even layer.
Use a CarPro 2Face Towel to remove any excess. CQuartz Lite does not need to be left to cure on the surface so it should be removed immediately. Check well with an appropriate light source to ensure you remove any high spots (any excess product that was not leveled) or residue. Note: For a short period of time after application, high spots that were not removed immediately can be corrected by applying more CQuartz Lite on that area and wiping off immediately.
After the paint is free of residue, leave to dry for 4 hours prior to getting wet. Any water drops during the first 48 hours should be removed before drying to prevent water spots. We also recommend the use of CarPro Reload one hour after application to protect from water spots during the first 48 hours.