Shake Well. Always work on a cool, properly cured paint surface. Prime new or dry pads.
Rotary: Set buffer to approximately 1000-1500 RPMS and apply the product directly to the paint surface. Begin working in a 2' x 2' area with overlapping passes. Continue working until light film remains.
DA Polisher: Apply directly to the appropriate buffing pad. Set machine to 4-5 and begin working in a 2' x 2' area with overlapping passes. Apply moderate pressure on initial 2-3 passes followed with light pressure for the following two passes.
Wipe off residue immediately after each panel. Inspect finish with appropriate light.
TIPS: Best when used after M110 Ultra Pro Speed Compound. To achieve a swirl-free finish, clean pad frequently and apply moderate pressure on initial passes, reducing pressure gradually with final passes.