Shake Bottle Well. Always work on a cool, properly cured paint surface. Prime new or dry pads.
Rotary: Set polisher to approximately 1200-1800 RPMS and apply Meguiar's Ultra Pro Speed Compound directly to the paint surface. Use with a wool or foam pad and begin working in a 2' x 2' area with overlapping passes. Buff area using light to medium pressure. Reduce pressure when the compound begins to dry.
DA Polisher: Apply directly to appropriate wool or foam pad. Set machine to 4-5 and begin working in a 2' x 2' area with overlapping passes. Apply moderate pressure on initial 2-3 passes followed with light pressure for the following two passes.
Wipe remaining residue with a microfiber towel. Inspect finish with proper lighting. Continue working until defects or sanding marks are removed.
TIPS: To achieve a swirl-free finish, clean the pad frequently and apply moderate pressure on initial passes, reducing pressure gradually with final passes. Get your best results when followed with M210 Ultra Pro Finishing Polish.